In the life of every bike rider, especially in his youth, there comes a moment when just riding a bike becomes uninteresting. He starts to think about speed, attention… More often, this is when a cyclist first thinks about; are tricks and the first thing that comes first to his mind when thinking about tricks is wheelies; a spectacular, effective, and not too complicated trick. All you have to do is choose the best bike for wheelies and make sure that you are in good physical condition
The word wheelie denotes a trick in which the bike moves only on the rear wheel. In this case, the rider usually sits in the saddle, when the cyclist has finally honed his skills and learned how to masterfully balance, he can stand up on the pedals and twist them from this position. Balancing is carried out using the knees and the rear brake.
The ability to stand on the rear wheel instantly sets the rider apart from other cyclists. This testifies to the skill of owning your bike, the agility and courage of the rider. Wheelie riders are often the center of attention and authority among fellow cyclists.
Before you start mastering this trick, you must purchase the appropriate equipment. You can’t use a bike in normal conditions without a helmet and knee pads in extreme riding, in which only the rear wheel is used for movement; because it can lead to serious injuries. The practice and experience of thousands of riders show that learning to make wheelies without falls is impossible; even experienced cyclists, lifting their bike onto the rear wheel, sometimes find themselves on the asphalt. Therefore, before starting training, you need first to purchase some important equipment like, high-quality elbow pads, knee pads, a helmet, and of course a bike that will allow you to do the wheelie successfully. You will find here the best bike for wheelies that will help you to do a wheelie on.
How to do a wheelie:
If you are reading this article means you have just started your journey in learning this skill; tho help you more in mastering bike wheelies here are some advice:
It is more convenient to perform wheelies on bike when driving at low speed. It is recommended to raise the saddle to the maximum height at which you can still pedal comfortably. Since when performing a trick, the support of the pelvis against the saddle and, as it were, holding the saddle with the hips plays an important role.
For many tricks, brake performance is also important. Ideally, the rear wheel should be equipped with a hydraulic brake. Before going to a training session, the bike should be thoroughly checked to ensure that the brakes are working properly.
Make sure to choose an upward slope or a flat asphalt area where you can accelerate the bike to the required speed and where objects will not be located, impacts on which can lead to serious injuries and damage the bike.
Perhaps the most important thing in mastering this trick is choosing the right gear. Too small gear will not allow the bike to accelerate, if set too high it will be too difficult to maintain balance. Avoid choosing gear less than 1 – 4. Experienced stunt drivers prefer to get on the rear wheel at 2 – 6. However, at first, some riders who have difficulty balancing can try wheelies in gear 1 – 3.
Choosing a good bike is also necessary, the first step you should do before start learning wheeling is to buy a good bike for wheeling. It is going to help you alot as it is going to make it a bit easier for you to master it.
Riding technique:
Mastering the wheelie begins with training the skill of raising the front wheel. To do this, you need to accelerate the bike to a speed of about 15 km / h. In this case, the steering wheel must be held with straight hands, leaning towards it as close as possible.
At the moment when the cyclist’s pushing leg takes the uppermost position, it is necessary to shift the center of gravity back and simultaneously press the pedal with effort. In this case, the steering wheel must be jerked towards you. Following the laws of physics, at this moment the front wheel should rise above the road, and only the rear wheel will roll.
Experienced riders do not recommend going to the next stage without learning how to properly lift the front wheel. More often than not, honing a skill takes more than one day. Only after getting on the rear wheel is obtained from almost every attempt, one should begin to learn how to keep the two-wheeler in balance.
Empirically, it is necessary to find a point at which the bike will not fall in different directions when trying to make bike wheelies. If you fall backward, you can level the bike by using the rear brake. When falling forward, accelerate pedaling. When tilting the bike to the side, the following manipulations will help to correct the situation: when falling to the left, it is necessary to bring the left knee as close to the frame as possible and take the right knee away from it as far as possible.
In the process of mastering the wheelie, it is worth working out the dismount from the pedals in order to avoid falling on the back if the bike falls back. To perform a dismount, the body should be raised above the saddle, the legs in the jump go back, while the bike, held by the handlebars, moves forward for some time.
Now that you have learned how to lift the front wheel off the ground and ride using only the rear wheel a few meters, you can proceed to the next stage of mastering the wheelie and start maneuvering the bike.
There are two ways of steering when making a wheelie – standard, with the help of the rudder, and counterweight, which involves the use of the knees.
When performing a wheelie on bike, you can change the direction of movement in which the bicycle follows in the usual way – by turning the steering wheel. However, all commands are executed mirrored – to turn to the right, the steering wheel must be turned to the left and vice versa. Not every rider is able to quickly switch from normal to mirror mode, but regular training will help to cope with the unusual feature of wheelie.
An alternative way to change the direction of the bike when performing a wheelie is to shift the center of gravity. To do this, you must learn to use your knees as a counterweight by simply tilting them in the direction of the turn.
While mastering this riding technique, you should be prepared for the inevitable falls during training.
Most riders will need at least a week of regular training to be guaranteed to travel 20 meters using only the rear wheel.
Tips on how to use wheelies
- Make sure your brake is well adjusted.
- choose the best bike for making a wheelie, bike is the most important thing without the appropriate tools you will find it difficult to learn how to wheel, so you should be very careful while buying it.
- Practice in an open area with few people to avoid injuring yourself and those around you.
- Find a balance point. This is the point at which the bike balances perfectly between being at the top or at the bottom. To ride on two wheels in a car, you also need to find a balance point. A stable balance can be found by pulling the steering wheel correctly, leaning back, and pedaling.
- The slower you drive before starting the trick, the easier it will be to do it.
- Wear a helmet and protective clothing. Gloves are optional, but training the wheelie puts stress on your hands and you can get calluses.
- Before learning a trick, check the condition of your bike (so that the wheels, bolts, handlebars, saddle are well secured) owning a wheelies bike doesn’t mean that the parts of your bike will stay always in a good condition.
- Overcome fear. Often, inevitable falls can lead to a fear of serious injury and damage to your bike. Mastering the skill of a timely dismount back and high-quality equipment will allow you to realize the reliability of protection and get rid of fear when performing a trick;
- Mastering this trick, you should not stand on the pedals, at least until the moment when the wheelie technique is at an acceptable height;
- It should be performed when riding a bike exclusively with straight arms;
- You should not make sudden movements, brake, or accelerate when lifting onto the rear wheel – the wheelie runs smoothly;
- To maintain good shape and develop physical strength, since it will be very difficult for a rider who does not have good sports data to climb onto the rear wheel.
Don’t be discouraged if you can’t get onto the rear wheel right away. It takes most riders a week or even a month to perfect this trick. It is worth gaining perseverance and patience.
Top 7 of the best bike for wheelies:
- Comes with an aluminum frame, features system for efficient yet supple suspension; and also with an improved adjustment range.
- Rears have a small bump sensitivity.
- Has different colors: Blue gloss, grey, curry yellow matte, dark grey/ mint gloss, grey, mint gloss, pale grey matte; and comes in different styles: Release 1/ 2/ 3/ 29 2/ 29 3.
- High quality material.
- It is very smoothatriding, and the best at maneuvering.
- It is a durable bike.
- Schwinn high timber bike is great at wheeling, allows you to learn this trick very quickly
- The seat post was made to be easy to adjust.
- The tires are wide and knobby for all-terrain, giving more stability.
- Comes in different colors:blue, pink, black, coral, orange, red, teal, grey, navy blue. yellow.
- It is a good bike for mastering wheelies.
- It is a lightweight bike with a light frame too.
- Come with tubeless and robust tires.
- Wheels measure 29 inches.
- Very easy to assemble.
- Gives you more control and comfort on the trail.
- Have an aluminum frame.
- A very comfortable saddle; you don’t have to worry about long rides on our bike.
- Brakes are so powerful and you can rely on it in many cases.
- Wide tires make your ride stable and smooth.
- Comes in different colors: black, blue, grey, navy neon green, orange and white.
Aluminum mountain frame and a powerful Schwinn suspension fork absorb shocks.
- Front and rear Shimano derailleurs make gear changes easy and smooth.
- Wide knobby tires for bumpy terrain.
- Five years warranty.
- Very easy to control and it is fast and durable.
- You should pay more attention while assembling your bike.
- Lightweight carbon fiber frame
- The bike’s structure is very strong and it is not heavy.
- Hydraulic Suspension Fork with a damping system.
- Double Mechanical Disc Brakes with a great stopping power, in case of emergencies.
- It is very easy to assemble.
- A great design and durable structure.
- Easy to assemble.
- Aluminum alloy frame for responsive rides.
Conclusion
Making bike wheelies is one of the coolest and most lucid maneuvers that we can do, and it very wide spread between youth and also teenagers and it require a good bike for wheelies , though it may seem very easy to do if we saw an expert doing it but it require technique too and a hard training to be done successfully; as you need to buy certain equipments one of them is wheeling bike as we mentioned above, and you should be very careful while buying it because it a very essential element that will add your ride comfort and smoothness, in this article we did a research about the best bike for wheelies that will for sure impress you and provide with the comfort you need in your bike.